|
FLASH被删除,CONSOLE连电脑终端显示如下:
IPVGS_8_MAIN BSP Ver 1.0.0.5 (Aug 2 2005 - 13:09:16)
CPU: XPC857DSLZP50B at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
Watchdog enabled
DRAM: 32 MB
FLASH: 8.5 MB
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET, FEC ETHERNET
Hit any key to stop autoboot: 0
## Booting image at 30020000 ...
Bad Magic Number
=> (启动到这里就停住了,这里可以使用UBOOT的一些命令)
=> help
? - alias for 'help'
askenv - get environment variables from stdin
autoscr - run script from memory
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
bootvx - Boot vxWorks from an ELF image
cmp - memory compare
coninfo - print console devices and informations
cp - memory copy
crc32 - checksum calculation
date - get/set/reset date & time
dhcp - invoke DHCP client to obtain IP/boot params
diskboot- boot from IDE device
download - download application from serverip
download_all - download all the flash date from serverip
echo - echo args to console
erase - erase FLASH memory
flinfo - print FLASH memory information
go - start application at address 'addr'
help - print online help
ide - IDE sub-system
iminfo - print header information for application image
imls - list all images found in flash
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing)
mtest - simple RAM test
mw - memory write (fill)
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sleep - delay execution for some time
tftpboot- boot image via network using TFTP protocol
version - print monitor version
因为使用了erase all 命令所以被删除了,手里还有一台一样的机子,有什么办法能把那机子的flash拷贝过来?
谁有这机器的固件吗?邮箱gdsdj@qq.com,先谢谢
------------------------Dsp--------------------------
Dsp Receive Dtmfrelay From HW
init started: BusyBox v1.00-pre6 (2006.02.22-17:27+0000) multi-c
Task:Starting System Root Task
Task:Starting System Exception Task
=======================Task==============================
* IPVGS system booting......
* Software Version:ipvgs-8-857b-L-1-31-4-D
* Create Date : #1 Fri Mar 10 14:57:03 CST 2006.
* Beijing Gongye co.,Ltd. All rights reserved.
=======================Task============================== |
|